This look-up table (LUT) contains the following fitted lognormal mode parameters for the 
 modified (dry, generally non-lognormal) aerosol size distribution (normalized so that N=1/cm3):
 
 kcomp, catot, r, logsigma,
 
 where r and logsigma are the modal median radius and the logarithm (base 10) of the standard deviation, 
 kcomp is the aerosol size mode number 
 catot is total added internally mixed mass (ug/m3) as H2SO4
 
 This LUT is made with an AeroTab version with the following input parameters, to be checked 
 against CAM5-Oslo (producing error messages on inconsistencies):
 X-CHECK catot =
 0.1000E-09 0.1000E-03 0.2000E-03 0.4000E-03 0.8000E-03 0.1500E-02 0.3000E-02 0.6000E-02 0.1200E-01 0.2500E-01 0.5000E-01 0.1000E+00 0.2000E+00 0.4000E+00 0.8000E+00 0.1500E+01
 (fac: not used)
 (fbc, faq: not used)
 Modal median dry radius (m) at point of emission 
 X-CHECK originalNumberMedianRadius =
 0.40000E-07
 and corresponding standard deviation 
 X-CHECK originalSigma =
 0.18000E+01
 Aerosol type mass densities (kg/m3) for ammonium sulfate, BC, OC, dust and sea-salt 
 X-CHECK aerosol_type_density =
 0.17690E+04 0.20000E+04 0.15000E+04 0.26000E+04 0.22000E+04
 
 X-CHECK LUT: table values to be used for look-ups and interpolations in CAM5-Oslo:
  3  0.10000E-09  0.40000E-01  0.25523E+00
  3  0.10000E-03  0.41000E-01  0.25225E+00
  3  0.20000E-03  0.42000E-01  0.24925E+00
  3  0.40000E-03  0.43000E-01  0.24898E+00
  3  0.80000E-03  0.47000E-01  0.23635E+00
  3  0.15000E-02  0.52000E-01  0.22569E+00
  3  0.30000E-02  0.61000E-01  0.20899E+00
  3  0.60000E-02  0.76000E-01  0.18391E+00
  3  0.12000E-01  0.10000E+00  0.14605E+00
  3  0.25000E-01  0.12500E+00  0.14105E+00
  3  0.50000E-01  0.15800E+00  0.13256E+00
  3  0.10000E+00  0.20000E+00  0.12674E+00
  3  0.20000E+00  0.25300E+00  0.12316E+00
  3  0.40000E+00  0.31900E+00  0.12216E+00
  3  0.80000E+00  0.40300E+00  0.12067E+00
  3  0.15000E+01  0.50000E+00  0.11749E+00